Installation; Step 1 - Configuring The Touchscreen Controller - Elo TouchSystems software Driver Manual

Step 1 - Configuring the Touchscreen Controller 9

Changing Your Hardware Configuration with SETUP 14
This chapter describes the installation procedure for the software on the DOS and
Windows Driver Disk. Four steps are required:
S 1 - C
TEP ONFIGURING THE
Elo ships most touchscreen controllers preconfigured for use with Elo software.
Step 2 - Installing the Controller 10
Step 3 - Running the INSTALL Program 10
Step 4 - Calibrating the Touchscreen 12
Where to Go from Here 13
Uninstalling the Software 14
Step 1 Configuring the touchscreen controller.
Step 2 Installing the controller.
Step 3 Running the INSTALL program.
Step 4 Calibrating the touchscreen.
T
OUCHSCREEN

Installation

C
ONTROLLER

9