Printing A Sample Card; Entering The Print Only Command; Entering The Print With Mag Encoding Command; Managing Printer From The Cups Web Interface - Fargo CUPS HDP5000 User Manual

Printing a Sample Card

Entering the Print Only Command

Using the Fargo Card Printer
----------------------------
To test the functionality of the printer, you can type the following command
to print a sample card (root privileges not necessary):
$ lpr samplecard.jpg

Entering the Print with Mag Encoding Command

Run the following command:
# lp –d [PrintQueueName] –o "Magtrack1=%25MAGTEST1%3F
Magtrack2=%3B1234567890%3F Magtrack3=%3B1234567890%3F" [filename]

Managing Printer from the Cups Web Interface.

The Web printer management interface is located at:
http://localhost:631/printers
From there you can perform all printer management tasks with a few simple mouse clicks.

Printer-Specific Options

Each printer has its own options that are based on the options in the PPD (driver) file. The
lpoptions command provides a way to see a list of the available options:
lpoptions –p HDP5000 -l ENTER
Each option starts with the option name, a slash, the human readable text for that option, and a
colon. This is followed by a list of values for that option. The asterisk (*) in from of the
value indicates that this is the default setting.
The options themselves follow the colon:
To see a list of available printers
lpstat –p –d ENTER
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1 34