Following The Resin Heat Front Procedure; Following The Resin Heat Back Procedure - Fargo CUPS HDP5000 User Manual

Following the Resin Heat Front Procedure

Command Line
Usage
ResinHeatFront=0
<-50 to 50>

Following the Resin Heat Back Procedure

Command Line
Usage
ResinHeatBack =
0
<-50 to 50>
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1
CUPS option
Resin Heat Front (K) = 0
CUPS option
Resin Heat Back (K) = 0
Description
1. Adjust the Resin Heat Front
value higher to use more heat
to transfer resin to a card.
2. Adjust the Resin Heat Front
value lower to reduce the
amount of heat (used to
transfer resin to the card).
Description
1. Adjust the Resin Heat Back value
higher to use more heat and
increase the transfer of resin to a
card.
2. Adjust the Resin Heat Back value
lower to reduce the amount of heat
used and reduce the transfer of
resin to the card.
16