Lamination Options
Lamination Position and Speed:
Command Line Usage
LaminationPosition = <-100 to
+100>
LaminationSpeed = < 8 to 55>
Lamination Side:
Command Line Usage
LaminationSide = 0
LaminationSide = 1
LaminationSide = 2
LaminationSide = 3
LaminationSide = 4
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1
CUPS Options
Description
Lamination
Horizontal Offset:
Position = < -100
To move the overlaminate
to +100>
more toward the card output
side of the Printer, enter a
positive number
Lamination
Dwell Time:
Speed = <0.8 to
Controls the throughput
5.5> Is a value
speed of the cards.
from 8 to 55
divided by 10.
CUPS Options
Description
Lamination Side
No Lamination will be done.
= None
Lamination Side
Only front of card will be
= Front
laminated.
Lamination Side
Only back of card will be
= Back
laminated
Lamination Side
Both sides of card will be
= Both
laminated.
Lamination Side
Will flip the card again before
= Opposite
laminating.
21