Appendix B: Other Components; Appendix C: Troubleshooting - ProScan PS27125JX1BB User Manual

Table of Contents

Advertisement

TROUBLESHOOTING
1-roubles sometimes
are caused by simple "faults"
that you can correct
without
the help of a service technician.
If you
experience
any difficulty
with your TV, check a few basic remedies
before calling your service technician.
TV will
not turn
on
Check to make sure it is plugged
in.
Check the wall receptacle
(or extension
cord) to make sure it is "live"
by plugging
in something
else.
Maybe batteries in remote control
are "dead."
Maybe remote control
is not aimed at remote sensor.
The front panel controls
may be locked (disabled).
Use the remote control
to unlock
the front panel controls
by
selecting
the Front Panel Lockout
in the Parental Controls
menu and choosing
Unlock.
Controls
don't
work
If using remote control,
make sure remote is in TV mode by first pressing TV button.
]-ry unplugging
set for two minutes
and then plug it back in and turn it on again.
The front panel MENU
button
may be disabled.
Use the remote control
to turn off channel
blocking.
Select Channel
Block in the Parental Controls
menu and choose
Off:
Problems
with
Remote
Maybe something
is between
the remote and the remote sensor.
Maybe the remote is not aimed directly
at the component
(TV or VCR) you are trying
to control.
Maybe remote is not in TV Mode.
Press the TV button so remote will control
TV.
Maybe batteries in remote are weak, dead or installed
incorrectly.
Try replacing
batteries. (Note, if you remove the
batteries, you may have reprogram
the remote to control
other components.)
Remove batteries and hold number
1 for at least 60 seconds to drain the microprocessor
inside the remote.
Release
number
1, replace the batteries,
and (if necessary) reprogram
the remote.
Remove all batteries for approximately
12 hours. Then replace
batteries and (if necessary) reprogram
the remote.
Turns off while
playing
Schedule function may have been activated.
Electronic protection circuit may have been activated because of a power surge, Wait 30 seconds and then turn on
again, If this happens frequently, the voltage in your house may be abnormally high or low.
TV Turns on unexpectedly
Schedule On function may have been activated.
78

Advertisement

Table of Contents
loading

Table of Contents