Table of Contents
Advertisement
THINGS
TO
DO
BEFORE
CONNECTING
COMPONENTS
Protect
your components
from power
surges
Connect
all components
before
plugging any power
cords into the wall outlet.
Always turn off theTV
and/or
component
before you
connect
or disconnect
any cables.
POSITION
CABLES
CORRECTLY
TO
AVOID
AUDIO
HUM
OR
INTERFERENCE
Insert all cable plugs firmly
into theirjacks,
Place the audio/video
cables to the sides of theTV's
back panel instead of straight
down the middle
after
you connect
your components.
Try not to coil any twin-lead
cables and keep them
away from the audio/video
cables as much as possible,
Make sure all antennas
and cables are properly
grounded.
Refer to the SafetyTips
sheet packed with
your TV,
PROTECT
YOUR
COMPONENTS
FROM
OVERHEATING
Do not block ventilation
holes in any of the
components.
Arrange
the components
so that air can
circulate
freely,
Do not stack components.
Allow
adequate
ventilation
when placing your
components
in a stand,
Place an amplifier
on the top shelf of the stand so
heated
air rising from it will not flow around other
components.
Advertisement
Table of Contents
