ProScan PS27125JX1BB User Manual page 76

TV, (2) VCRS, AND SATELLITE
RECEIVER (CONNECTION I)
This information applies to Connection I in the Connections Foldout,
Connection I provides:
stereo sound from broadcast programs
stereo sound from VCR
Picture in Picture (PIP)
watch one channel on TV while recording another channel
To use this connection you must have:
(5) coaxial cable
(9) audio/video cables
(1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection I.
2. Return to First Things First, then follow the steps in the Interactive
Setup.
USING CONNECTION I
To watch TV programs:
1. ]urn VCR and satellite receiver and laserdisc player off.
2. Press TV and tune to a channel.
To watch Satellite programming:
1. Press SAT-CABLE and tune to a channel.
To record from one VCR to the other (tape dubbing):
1. ]urn satellite receiver off.
2. Insert original tape into VCR2.
3. Insert blank tape into VCR1.
4. PressVCR1.
5. Set VCR1 to line input (for more, see your VCR User Manual).
6. Press RECORD to begin recording.
7. Press DVD,VCR2, then press PLAY.
8. If you want to watch a different channel, set the TV/VCR switch
on both VCRs to TV; press TV; then tune to a channel.
74