ProScan PS27125JX1BB User Manual page 71

TV AND (2) VCRS
(CONNECTION D)
This information applies to Connection D in the Connections Foldout,
Connection D provides:
stereo sound from broadcast programs
stereo sound from VCR
Picture in Picture (PIP)
watch one channel on TV while recording another channel
record from one VCR to the other
To use this connection you must have:
(3) coaxial cable
(6) audio/video cables
(1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection D.
2. Return to First Things First, then follow the steps in the Interactive
Setup.
You can record from one tape to
another (tape dubbing}:
I, Insert original tape into \/CR2,
2, Insert bla _k tape into VCR1,
3, Press \/CR1,
4. Set VCR1 to line input (for more, see
5, Press RECORD to begin recording,
6, Press DVD_VCR2, then press Pt AY,
7. if you want to watc_ a different
clanleJ, Bet both the JV/\/CI: switch
on both VCRs to iV; press I\/; then
tune to a channel,
Note: Ihe unauthorized recording of
satellite broadcasts, televisio_ p ograms,
or other copyrighted materials may
irffr inge the rights of others,
USING CONNECTION
D
To watch TV programs:
1. Turn VCR off.
2. Press TV and tune to a channel.
To record one program and watch another:
1. Turn VCR2 off.
2. Press VCR1 and tune to a channel.
3. Begin recording.
4. Make sure the TV/VCR switch on the VCR1 is set to TV.
5. Press TV and tune to a channel.
To play a tape on the VCR:
1. PressVCR1.
2. Press PLAY.
CABLE, CABLE BOX, OR ANTENNA
VCR 2
"_ Oj_T _" IN FROM ANT CH3
T
I _ct_" _or_ _dout,
69