Table of Contents
Advertisement
Not receiving
all cable channels
Make sure you have set up the GUIDE Plus+ menu to recognize your cable box. Select GUIDE Plus+ Menu
from the Main menu, then select Setup from the GUIDE Plus+ menu. Choose "Yes" when asked if you have a
cable box. Then select Auto Channel Search from the Main menu. Search for all channels when prompted.
C,an't select certain
channel
The channel may be blocked or not approved
in the Parental Controls
menu.
If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct "mode."
Noisy
stereo
reception
May be a weak station.
Use SOUND button to change to mono mode instead of stereo.
No picture,
no sound
but
TV is on
Maybe the cable/air setting
is set to the wrong position.To
fix, select GUIDE Plus+ Menu from the Main
menu, select the Setup option, and provide
the correct information
on the following
screens.
If watching
VCR (connected
only through
antenna
input), make sure TV is tuned to channel 3 or 4 - same
as CH3/4 switch on VCR. Also check to make sure the TV/VCR button on the VCR is in the correct "mode."
Sound
okay,
picture
poor
Check antenna connections.
Try adjusting
sharpness
function
to improve weak signals.
Black
box appears
on the screen
Captioning
may be turned
on. Check the Closed-Caption
Display control panel in the Channel menu.
GUIDE
Plus+
IR controllers
not
working
Check to make sure the controllers
are positioned
correctly
over the IR remote sensors.
Your remote may be interfering
with the IR controller.
Place a piece of dark tape over the IR controller.
GUIDE Plus+ system control of cable box is slower than direct control of the box when changing
channels.
Care and Cleaning
CAUTION:
Turn OFF yourTV
before
cleaning.
You can clean theTV as required,
using a soft lint-free cloth. Be sure to occasionally
dust the ventilation
slots
in the cabinet to help assure adequate
ventilation.
TheTV's
screen may be cleaned
with
a soft, lint-free
cloth
as well.
Take care not to scratch
or
mar the screen.
If necessary,
you may use a cloth dampened
with
warm
water.
Never use strong cleaning
agents,
such as ammonia-based
cleaners,
or abrasive
powder.
These
types
of cleaners
will damage
theTV.
While cleaning
do not spray liquid directly
on the screen, or allow liquid to run down the screen and inside the
TV. Also, avoid placing
drinks or vases with water on top of theTV.This
could increase the risk of fire or shock
hazard or damage
to theTV.
( Caution:
If fixed (non-moving)
images are left on the screen for long periods, they may be permanently
1
imprinted
on the screen.
Such images include network
Iogos, phone numbers,
and video games. This
damage
is not covered by your warranty.
Extended viewing
of channels displaying
these images should be
avoided.
55
Advertisement
Table of Contents
