Labeling The Channels - RCA 32GT740YX59CA9 User Manual

Labeling the Channels
This last step in the Interactive Setup lets you edit your channel
list and label your channels. (For more, see List and Labels in the
Using the Menu System section.)
1,
2.
Press MENU or OK to bring up the List and Labels control
panel.
Use the left and right arrows to point to the three different
areas of the control panel (called "fields").
,
4,
Use the up and down arrows to scroll through the numbers
and letters and select Yes or No in the Normal List field.You
may wish to refer to the call letters listed in your newspaper's
TV section for ideas on labeling the channels.
Repeat this process for each of your channels.Then press
MENU or OK to continue.TheTV can store up to 27 labels in
memory.
Use the CH ^ (channel up) or CH v
(channel down) buttons to change
channels in the Chan # field. This
works even if you're not in the Chan
# field. Or, enter the channel number
directly using the number buttons on
the universal remote. To enter a
number greater than 99, press and
hold "1" to enter the hundreds digit,
then press the two remaining
numbers.
The list and labels feature can also be
accessed from the Channel menu.
Because this procedure can be time
consuming, feel free to skip this step
and come back to it later.
19