Table of Contents
Advertisement
The choices for each screen are:
Not connected
Choose this if you do not have a
component
connected
to an antenna or video input on the
back of theTV, or if you don't want theTV to tune to a
channel when the particular
component
button is pressed.
Channel
2 (SATICable
only)
Choose this if your
component
is connected
to the antenna jack on the back of
theTV, and you want theTV to tune to channel 2 when you
press the specified
component
button.
Reminder:
Make sure
the component's
Ch 2/3/4 switch is set to channel 2.
Channel
3 Choose this if your component
is connected
to
the antenna jack on the back of theTV, and you want theTV
to tune to channel 3 when you press the specified
component
button. Reminder:
Make sure the component's
Ch 3/4 switch is set to channel 3.
Channel
4 Choose this if your component
is connected
to
the antenna jack on the back of theTV, and you want theTV
to tune to channel 4 when you press the specified
component
button. Reminder:
Make sure the component's
Ch 3/4 switch is set to channel 4.
Video
Input
Choose this if your component
is connected
to the VIDEO jack on the back of theTV and you want theTV
to tune to VID (SVID if you used an S-Video cable) input
channel when you press the specified component
button.
Video
input
Source
Lets you select whether
or not you have
used the S-Video jack to connect a component.
If you are
using the S-Video jack in this way, select S-Video Input. If
not, select Video Input.
Other
Menus
The rest of the menus--Parental
Controls, GUIDE Plus+ menu, and
Setup--are
also detailed in this manual.
Look for the GUIDE Plus+ setup routine
and the Setup menu in the section
Interactive Setup. Descriptions of how
to use Parental Controls and the GUIDE
Plus+ menu are in the section Features
and Controls.
Time Menu
SleepTimer
Displays a control
panel that lets you select the
amount of time you want to give theTV before it shuts itself off.
Schedule
Displays a control
panel that lets you set up a
schedule for turning
theTV on and off automatically.
Make
sure
to turn
the schedule
On.The on-screen
directions
guide you
through
the steps needed to set the schedule.
SetTime
Displays a control panel that lets you enter the
current time.The
on-screen directions
guide you through
the
steps needed to set the time. If your GUIDE Plus+ system is set
up, it will automatically
update your time and this option will not
appear.
36
Advertisement
Table of Contents
