Elo TouchSystems 3200L User Manual page 24

On-Screen Display (OSD)
Four OSD buttons are provided on the rear of the monitor to adjust various display parameters.
The same buttons are provided on an optional OSD Control Box which can plug into the PS/2
connector on the touchmonitor connector panel.
The buttons and their functionality are:
Button Function when OSD is not displayed:
Menu Display OSD main menu
Display OSD Color/Luminance submenu
Display OSD Audio submenu
Select Display Video Source submenu
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Increase/decrease monitor brightness.
Brightness
Default: maximum
Increase/decrease monitor contrast.
Contrast
Allows fine adjustments of the panel's pixel dot clock.
Clock Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Allows fine adjustments of the panel's pixel dot clock phase.
Phase Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Automatically adjusts the system clock to the input analog VGA video signal, affecting
the H-position, V-position, Clock, and Phase menu items.
Auto Adjust
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
H-position
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Moves the image vertically on the display in single-pixel increments.
Default: centered.
V-position
Not applicable when using HDMI video or the Computer Module.
Adjusting too far will adversely affect APR functionality.
Available Adjustment
User Manual – Interactive Digital Signage
SW601176 Rev D - Page 24 of 34
Function when OSD is displayed:
Return to previous OSD menu
Increase value of selected parameter /
select previous menu item
Decrease value of selected parameter /
select next menu item
Select parameter for adjustment /
select submenu to enter