Menu Settings - Farenheit TID-320 Owner's Manual

In-dash 3.2” monitor touch sensor dvd/mp4/cd mw/fm radio built-in ntsc tuner
Table of Contents

Advertisement

Press
/
buttons on remote to adjust the audio setting data (or press the
front panel to adjust the setting data).
Press SEL button on remote again to save the setting data and return to current mode.
Notes: If turn off the power, all the settings of each mode will be saved.
- If turn off the battery power, all the settings will be clear and become factory default setting.
- If you don't adjust setting within 3 seconds after selecting the desired setting item, the unit will
automatically return to the current mode.

Menu Settings

Press MENU button on front panel or remote control to enter MENU setting.
During FM mode press the MENU button to enter the setting mode.
Press
/
buttons on the remote control or press the VOL knob on front panel to select the setting.
Press ENTER button or
Press
/
buttons on remote control or press the
setting.
Press ENTER button or
MENU to return to last settings list.
• In Radio mode short and repeat press the OK button to select these settings:
AUDIO=> EXPERT => CLOCK
• In USB/Memory Card mode short and repeatedly press the OK button to select these settings:
AUDIO => PICTURE => EXPERT => CLOCK
AUDIO MENU
MENU
DESCRIPTION(tuning by left or right arrow)
BASS
Support 10 levels. Default level is 0.
TREBLE
Support 10 levels. Default level is 0.
Support 10 levels for each left and right channel. Default is left equal to
BALANCE
right.
Support 10 levels for each front and rear channel. Default is front equal to
FADER
rear.
EQ DSP OFF
FLAT→CLASSICS→POP→ROCK→DSP OFF
PICTURE MENU
MENU
DESCRIPTION
RED
Adjust level of red color. Support 50 levels. Default level is 25.
GREEN
Adjust level of green color. Support 50 levels. Default level is 25
BLUE
Adjust level of blue color. Support 50 levels. Default level is 25.
BRIGHTNESS
Adjust level of screen brightness. Support 50 levels. Default level is 25
CONTRAST
Adjust level of screen contrast. Support 50 levels. Default level is 25.
SHARPNESS
Adjust level of screen sharpness. Support 15 levels. Default level is 10
SCREEN
Adjust screen size: 16:9 →4:3→FULL
Resume color default status. (Select YES or NO by navigation buttons, and
COLOR
press ENTER button on remote control or OK button on front panel to confirm
RESET
"YES")
button on remote control or OK button on front panel to enter the setting.
button on remote control or OK button on front panel to confirm, press
knob on front panel to adjust the
Page - 10
knob on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tid-320t

Table of Contents