Assembling The Vacuum Cleaner; Getting Started; Getting The Best Results - Electrolux Z4009 Operating Instructions Manual

Assembling The
Vacuum Cleaner

GETTING STARTED

1. Check the dust container is in place.
2. To connect the hose into the suction
inlet push it until it clicks.
To disconnect the hose form the
suction inlet, push the button at the
end of the hose.
3. Attach the telescopic tube to the
hose handle and floor nozzle by
pushing and twisting together. (Twist
and pull apart to dismantle).
4. Extend the cable and connect to the
mains. The cleaner is fitted with cord
rewind, ensure cord is not twisted
before use. (Press foot pedal to
rewind. Note: Please hold the plug to
prevent it striking you or the
machine).
Filter indicator: before commencing
cleaning, plug the cleaner in and turn
it on (without the hose attached to the
cleaner).
If the indicator is red, clean the filter.
If the indicator is clear, attach the hose
and all the other necessary attachments
and commence cleaning.
5. Press the On/Off button to activate
the cleaner.
6. By moving the variable power
control, the suction power can be
adjusted.
7. You may adjust the air valve on
the handle.

GETTING THE BEST RESULTS

Carpets: Use the floor nozzle with the
lever in horizontal position.
Hard Floors: Use the floor nozzle with
the lever in vertical position.
Loose rugs/curtains/light weight
fabrics: Reduce the suction power. Use
the floor nozzle for loose rugs and the
upholstery nozzle for curtains, cushions,
fabrics, etc.
5