Cleaning The Exhaust Filter; Cleaning The Floor Nozzle; Cleaning The Hose And Nozzle; Cleaning The Turbo Nozzle - Electrolux ERGOEASY ZTI7635 Owner's Handbook Manual

10. Close the container with the lid and
place the container back into the
cleaner.
Cleaning The
Exhaust Filter
The washable exhaust filter can be cleaned
by rinsing it underwater. Let it dry before
placing it back into the cleaner.
Cleaning The Hose
And Nozzle
The vacuum cleaner stops automatically
if the nozzle, tube, hose or filters become
blocked and when the dust container is
full. In such cases, disconnect from mains
and allow to cool for 20 ~ 30 minutes.
Clear blockage and/or replace filters,
empty the dust container and restart.
TUBES AND HOSES
• Use a cleaning strip or similar to clear
the tubes and hose.
• It may also be possible to remove the
obstruction in the hose by squeezing
it. However, be careful in case the
obstruction is caused by glass or
needles caught inside the hose.
Note: The warranty does not cover damage
caused to the hose while cleaning it.

CLEANING THE FLOOR NOZZLE

Be sure to frequently clean the combination
floor nozzle. Use the hose handle to clean
the nozzle.

CLEANING THE TURBO NOZZLE

• Disconnect the nozzle from the
vacuum cleaner tube and remove
entangled threads, etc. by snipping
them away with scissors. Use the hose
handle to clean the nozzle.
• In case the turbo nozzle stops working,
open the cleaning lid by pressing the
button and remove any objects that
obstructs the turbine to rotate freely.
7