Electrolux ERGOEASY ZTI7635 Owner's Handbook Manual page 6

Cleaning The
Cylindrical HEPA Filter
And The Dust Container
• The dust container must be emptied
when it is full and needs to be clean
every now and then.
• Clean the HEPA filter when the
indicator turns red.
1. Lift the dust container out.
2. Press the release button on top of the
dust container. Open the container.
3. Empty the dust container in a waste
paper basket.
4. Remove the pre-filter by twisting and
pull downwards.
6
5. Release the cylindrical HEPA filter by
twisting and pull downwards.
6. Use the brush attached to the back
of the container to take away dust and
particles attached to the HEPA filter.
7. Rinse the cylindrical HEPA filter in
water. Let it dry before placing it back
into the cleaner. Replace the filter when
necessary.
8. Remove particles that have got stuck
in the dust container and rinse it with
water. Ensure it is dry before placing
it back into the cleaner.
9. Put the pre-filter and lid back, make
sure that the tab on the dust container
lid is located securely into the holes
on the base (see 11- 12). Place the
dust container back into the cleaner.