Installation; Positioning The Projector; Adjustable Foot - Eiki LC-XBL30 Owner's Manual

Hide thumbs Also See for LC-XBL30:
Table of Contents

Advertisement

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
A : B = 4.3 : 1
3.6'(1.1m)
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)

Adjustable Foot

Projection angle can be adjusted up to 10.0 degrees with
the adjustable foot.
Lift the front of the projector and push the foot lock
latch on the projector.
Release the foot lock latch to lock the adjustable foot
and rotate the adjustable foot to adjust the position and
tilt.
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Keystone distortion of the projected image can be
corrected by menu operation.(see pages 23, 44-45)
19.1'(5.8m)
14.3'(4.4m)
9.5'(2.9m)
100"
40"
83
40"
100"
813 x 610
2032 x 1524
3.6'(1.1m)
9.5'(2.9m)
4.5'(1.4m)
11.4'(3.5m)
34.4'(10.5m)
28.6'(8.7m)
200"
150"
167
125
150"
3048 x 2286
4064 x 3048
14.3'(4.4m)
19.1'(5.8m)
17.1'(5.2m)
22.9'(7.0m)
Foot Lock Latch
(Inch Diagonal)
300"(tele )
300"(wide)
Max. Zoom
Min. Zoom
250
A
(Center)
B
200"
300"
6096 x 4572
28.6'(8.7m)
34.4'(10.5m)
Adjustable Foot
13

Advertisement

Table of Contents
loading

Table of Contents