Camera Installation - Edimax PT-31E User Manual

4 - DI/DO
connectors
5 – ETHERNET
6 - SD card slot
7 – Connector for
detachable
antenna
DI/DO PIN ASSIGNMENT
Item
GND
DO
DI1
DI2
To insert or release a wire, press the button of the PIN you wish to insert or release.

1-3 Camera Installation

Please follow the proceeding instructions to set up your new network camera. If you wish
to place this network camera on a table, please skip step 1 to 6.
second. IP camera will connect AP and set value during 5 ~10
seconds.
Digital input / output dry contacts. Connects to external
peripherals by wire. See next page for pin definitions.
WARNING: DO NOT CONNECT POWERED CABLE!
Connect to your local area network by Ethernet cable.
Inserts SD card for video recording. Maximum 32GB** of
SDHD card supported.
Connect the detachable antenna when wireless connection is
required.
Description
Signal ground
Digital Output #1
Digital Input #1
Digital Input #2
Step 1:
Screw mounting plate A on the wall via the
4 holes indicated by the arrows.
7