Joining A Network - Edimax HP-5102 User Manual

5.2 Joining a Network

If you want to add a new powerline device to an existing network, follow the following
procedures:
Step 1 Press the "Group" button on an adapter in the existing network (adapter A or B) for
less than 3 seconds. The Power LED will start to blink.
Step 2 Within 120 seconds after the Power LED starts blinking on adapter A or B, press
the "Group" button on the new adapter (adapter C) for at least 3 seconds.
Step 3 Wait for the connection to be established.
25