Connecting To The Network - Yamaha RX-V671 Owner's Manual

Hide thumbs Also See for RX-V671:
Table of Contents

Advertisement

Connect this unit to your router with a commercially-available
STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on PCs and DLNA servers such as
Network Attached
Storage (NAS) on this unit.
Modem
Network
Attached
Storage
(NAS)
F
Router
Network cable
• Some
security
software
installed
on your PC or the firewall
settings
of your
network
devices
(such as a
router)
may block the access
of this unit to the network
devices
or the Internet.
In such
cases,
configure
the
security
software
or firewall
settings
appropriately.
• You can connect
this unit to up to 16 music
servers
(PC, etc.), and each server
must be connected
to the
same
subnet
as this unit.
• To use the service
via the Internet,
broadband
connection
is strongly
recommended.
This unit (rear)
• When using a router that supports the DHCP function, the network parameters (IP address, etc.) will be
automatically assigned to this unit without configuring the network settings of this unit. If your router does
not support the DHCP function or you want to configure the network parameters manually, configure the
network settings (p.96).
• You can check whether the network parameters (IP address, etc.) are properly assigned to this unit in
"Network" (p.101 ) in the "Information".
En
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents