Placing Speakers - Yamaha RX-V671 Owner's Manual

Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
• This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to "6 -Q MIN'. In this case, you can also use 4-ohm speakers as the front speakers. For
details, see "Setting the speaker impedance" (p.16).
Front (L)
Front (R) |
Center
Surround (L)
Surround (R)
Surround back (L)
Surround back (R)
Surround back
Presence (L)
Presence (R)
Subwoofer
Produce front right/left channel sounds (stereo sounds).
• • • • • • •
• • • • • • •
Produces center channel sounds (dialogs, vocals, etc).
• • • • • •
Produce surround right/left channel sounds. Surround speakers also produce surround back channel sounds when • • • • • •
no surround back speakers are connected. • • • • • •
Produce surround back right/left channel sounds.
Produces mixed-down surround back right/left channel sounds. •
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.43), tile presence speakers create a
• •
natural stereoscopic sound field in your room. • •
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels.
This channel is counted as "0.1 ".
• • • • • • •
• For information on the ideal speaker layout, see "Ideal speaker layout" (p.116).
• If you have 7 speakers, use two of them as surround back speakers or presence speakers. To reinforce the rear right/left sound field, use them as surround back speakers.
To create a natural stereoscopic sound field, use them as presence speakers.
En 13