Ice And Water - Maytag MFW2055YEB00 User Instructions

The ice maker is not The refrigerator is not connected to a Connect refrigerator to water supply and turn water shutoff
producing ice or is not water supply or the water supply valve fully open.
producing enough ice shutoff valve is not turned on
(on some models) ...........................................................................................................................................................................................................
There is a kink in the water source line A kink in the line can reduce water flow. Straighten the water
source line.
The ice maker is not turned on Make sure the ice maker is on.
See "Ice Maker and Ice Storage Bin."
The refrigerator has just been installed Wait 24 hours after ice maker installation for ice production
to begin. Wait 3 days for full ice production.
The refrigerator door is not closed Close the door firmly. If it does not close completely, see
completely "The doors will not close completely."
A large amount of ice was recently Allow 24 hours for ice maker to produce more ice.
removed
An ice cube is jammed in the ice Remove ice from the ejector arm with a plastic utensil.
maker ejector arm NOTE: On some models, press the lever which opens the ice
maker door to access the ejector arm.
A water filter is installed on the Remove the water filter and operate the ice maker. If ice
refrigerator volume improves, then the filter may be clogged or
incorrectly installed. Replace filter or reinstall it correctly.
A reverse osmosis water filtration This can decrease water pressure. See "Water Supply
system is connected to your cold Requirements."
water supply
The ice cubes are hollow The water shutoff valve is not fully Turn the water shutoff valve fully open.
or small (on some models) open
NOTE: This is an indication ...........................................................................................................................................................................................................
There is a kink in the water source line A kink in the line can reduce water flow. Straighten the water
of low water pressure.
source line.
A water filter is installed on the Remove filter and operate ice maker. If ice quality improves,
refrigerator then the filter may be clogged or incorrectly installed.
Replace filter or reinstall it correctly.
A reverse osmosis water filtration This can decrease water pressure. See "Water Supply
system is connected to your cold Requirements."
water supply
Questions remain regarding water Call a licensed, qualified plumber.
pressure
18