Oven Light - Whirlpool WFG710H0AH0 User Instructions

Gas range
Table of Contents

Advertisement

Available languages

Available languages

The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the off position.
2. Turn the glass bulb cover in the back of the oven
counterclockwise
to remove.
3. Turn bulb counterclockwise
to remove from socket.
To Replace:
4. Replace bulb, then bulb cover by turning clockwise.
1. Unplug range or disconnect
power.
5. Plug in range or reconnect power.
TROUBI,ESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
www.whirlpool.com
In Canada, reference the Customer Service section at www.whirlpool.ca.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow
these instructions can result in death,
fire, or electrical
shock.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Nothing will operate
Power supply cord is unplugged.
Plug into a grounded 3 prong outlet.
Surface burners will not
operate
Household fuse is blown or a
Replace the fuse or reset the circuit breaker. If the problem
circuit breaker is tripped,
continues, call an electrician.
Main or regulator gas shutoff
See the Installation Instructions.
valve is in the off position.
The range is improperly
connected to the gas supply.
Contact a trained repair specialist or see Installation
Instructions.
Surface burner flames are
uneven, yellow and/or noisy
The control knob is not set
Push in knob before turning to a setting.
correctly.
Air in the gas lines
If this is the first time the surface burners have been used, turn
on any one of the surface burner knobs to release air from the
gas lines.
Clogged burner ports
See "Sealed Surface Burners" section.
Clogged burner ports
See "Sealed Surface Burners" section.
Burner caps positioned
See "Sealed Surface Burners" section.
improperly
Range converted improperly
If propane gas is being used, contact a service technician or
see cover for contact information.
Excessive heat around
cookware on cooktop
Cookware that is not the proper
size
The cookware should be centered above the burner with the
bottom sitting level on the grate. The flame should be adjusted
so that it does not extend up the sides of the pan.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wfg720h0as0Wfg710h0ae0Wfg710h0as0Wfg714hlas0

Table of Contents