Playing A Disc; Pausing Playback (Still Mode); Stopping Playback; To Skip To A Different Track - Audiovox VD1400HT Owner's Manual

DVD CD
Basic playback
This owner's manual explains the basic instructions of this Unit. Some DVD discs are produced
in a manner that allows specific or limited operation during playback. As such, the Unit may not
respond to all operating commands. This is not a defect in the Unit. Refer to the instruction
notes of discs.
" " may appear on the TV screen during operation. A "
operation is not permitted by the Unit or the disc.

Playing a Disc

1. Press the POWER/STANDBY button on the front panel or press the
turn on the Unit while the Unit is in standby mode.
2. Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 33 to 41) before proceeding to step 3.
3. Press the OPEN / CLOSE button. The disc tray opens.
4. Place the disc on the disc tray with the label side up.
5. Press the OPEN / CLOSE button. The disc tray closes.
It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start
playback of the disc.
5. Press the PLAY button.
Notes:
• Use the OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you
may damage the Unit.
• Let the disc tray open completely before removing the disc. Press the
tray after you remove the disc.

Pausing playback (still mode)

Press the PAUSE button. To resume normal playback, press the
II

Stopping playback

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the
If you press the STOP button twice, the Unit's memory will be cleared and pressing the
the disc to the beginning.

To skip to a different track

• Press the SKIP button once to skip to the start of the previous track.
• Press the SKIP button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
Playing a Disc
PLAY button.
DVD CD
- 21 -
" means that the desired
POWER button on the remote control to
OPEN / CLOSE button to close the disc
PLAY button.
PLAY button will reset
(continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)