Table of Contents
Advertisement
DVD
CD
Basic playback
This owner's manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a
manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond
to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs.
"
" may appear on the TV screen during operation. A "
permitted by the DVD Unit or the disc.
Turning on the unit
Press the
power button on the front panel, the STANDBY indicator will
light up. Then select the desired function by pressing the FUNCTION button.
Note: Remote control can turn on the unit only if the unit is in standby mode.
To turn off the unit
Press the
power button on the front panel, the unit will be turned off and the display will go dark. If you press
STANDBY/ON
button on the remote control to turn off the unit, it will bring the unit to standby mode. .
Playing a Disc
1. While the unit is in standby mode, press FUNCTION button to select DVD mode. It will take a while for disc holder
automatically rotating to load disc 1.
2. If the display shows "Load" or "NO DISC", press the
3. Press DISC 1 - 5 select button on the remote control, after a while, the disc tray will automatically close and then
open. Disc holder will automatically rotate one cycle and stop.
4. Place the first disc on the disc holder with the label side up.
5. Press DISC 1 - 5 select button on the remote control or DISC SKIP button on the front panel to rotate disc holder
to load other discs.
6. Press the
OPEN / CLOSE button. The disc tray closes. .
It takes a short while for your unit to load the discs. After loading, for some discs, the unit will automatically start
playback of the disc.
7. Press the
PLAY button.
8. Press DISC 1 - 5 select buttons or DISC SKIP button on the front panel to select other disc playback.
Notes:
OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you
• Use the
may damage the Unit.
• Let the disc tray open completely before removing the discs. Press the
tray after you remove the discs.
OPEN / CLOSE button on the front panel to open the disc tray, the unit will stop playing. The disc
• If you use the
holder will rotate half circle so that the disc can be taken out. If you use the
control to open the disc tray , the playback will not be affected.
Pausing playback (still mode)
PAUSE button. To resume normal playback, press the
II
Press the
Stopping playback
STOP button at the location where you want to interrupt playback. To resume playback at the position
Press the
where the disc was stopped, press the
STOP button twice, the Unit's memory will be cleared and pressing the
If you press the
the disc to the beginning.
To skip to a different track
SKIP button once to skip to the start of the previous track.
• Press the
SKIP button to skip to the next track.
• Press the
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
Notes:
• During playback, disc tray can be opened/closed to add disc and the current disc playback will not be interrupted
OPEN / CLOSE button on the remote control).
(only by pressing
• The
/
(SKIP) buttons can only be used to choose a track of the current disc. To choose a track of another
disc, DISC 1 - 5 select buttons or DISC SKIP button should be pressed to get to the desired disc first.
151AUD19_E.pmd
Playing a Disc
" means that the desired operation is not
OPEN / CLOSE button. The disc tray opens. .
PLAY button.
E - 19
19
WARNING
BEFORE TRANSPORTING THE
UNIT, TAKE OUT ALL DISCS
FROM DISC TRAY.
OPEN / CLOSE button to close the disc
OPEN / CLOSE button on the remote
PLAY Y button.
PLAY Y button will reset
(continued on next page)
4/26/2004, 11:12 AM
Advertisement
Table of Contents
