Drive Mounting; Figure 6. Mounting Dimensions-Top, Side And End View - Seagate Enterprise Capacity 3.5 HDD/Constellation ES Product Manual

3.4 D
RIVE MOUNTING
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See
Figure 6 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 in-lb).
2TB models
Weight: (maximum)
710g (1.565 lb)
Note.
These dimensions conform to the Small Form Factor Standard documented in SFF-8301 and
SFF-8323 found at
Figure 6. Mounting dimensions—top, side and end view
C ES S
ONSTELLATION ERIAL
1TB models
640g (1.411 lb)
www.sffcommittee.org
ATA P M , R
RODUCT ANUAL
500GB models
610g (1.345 lb)
. F
EV
25