Reliability; Annualized Failure Rate (Afr) And Mean Time Between Failures (Mtbf); Agency Certification; Safety Certification - Seagate Enterprise Capacity 3.5 HDD/Constellation ES Product Manual

2.13 R
ELIABILITY
2.13.1

Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)

The product shall achieve an Annualized Failure Rate (AFR) of 0.73% (MTBF of 1.2 million hours) when operated nominal power and
typical case temperatures of 40°C. Operation at temperatures outside the specifications in Section 2.9 may increase the product AFR
(decrease MTBF). AFR and MTBF are population statistics that are not relevant to individual units.
AFR and MTBF specifications are based on the following assumptions for business critical storage system environments:
• 8760 power-on-hours per year.
• Operations at nominal voltages.
• Temperatures outside the specifications in Section 2.9 may reduce thee product reliability.
• Normal I/O duty cycle for enterprise nearline applications. Operation at excessive I/O duty cycle may degrade product reliability.
The enterprise application nearline environment of power-on-hours, temperature, and I/O duty cycle affect the product AFR and MTBF.
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Load unload cycles
Warranty
Preventive maintenance
2.14 A
GENCY CERTIFICATION
2.14.1

Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.
2.14.2

Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility
Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for
Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN
55024.
Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the
test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly
designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and
system integrators should confirm EMC compliance and provide CE marking for their products.
C ES S
ONSTELLATION ERIAL
15
1 per 10 bits read, max
0.73% (nominal power, 40°C case temperature)
300,000 cycles
To determine the warranty for a specific drive, use a web browser to access the
following web page:
http://www.seagate.com/support/warranty-and-returns/
From this page, click on the "Verify Your Warranty" link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase.The
system will display the warranty information for your drive.
None required.
ATA P M , R
RODUCT ANUAL
. F
EV
20