Connecting An Audio Amplifier; Connecting A Pc - Sharp Aquos LC-19DV28UT Operation Manual

Connecting to External Equipment
• When using coaxial cable:
Itis possibleto outputaudio through the DIGITALAUDIOOUTPUT terminal.
Rear of the TV
AUDIO
0
I
Coaxial cable
• When using HDMI cable (INPUT 3):
Rearof the TV
HDMt-cerliticd
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMl-certified cable to
the INPUT 3 (HDMt) terminal.
• The HDMI terminals only support digital signal.
• When using DVI-HDMI conversion cable (INPUT 3):
Rearof the TV
: @
AiJD_O
DVI-HDMI conversion cable
0 3.5 mm stereo minijackcable
• When using an DVI-HDMt conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVt-HDMt conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 28.)
(_=18