Table of Contents
Advertisement
Basic adjustment
settings
Automatically
detects
a film-based
source (originally
encoded
at 24 frames/second),
analyzes it then recreates
each still film frame for high-definition
picture quality.
On
Detects, analyzes, converts film source
Off
Normal viewing mode
The brightness
level range of the OPC sensor's automatic
adjustments
can be set according
to your preferences.
The adjustment
range of the OPC sensor can be set to a
maximum
of ÷ 16 and a minimum
of - 16.
Max.
- 15 through + 16
Min.
- 16 through + 15
• "Film Mode" does not function when you set the "AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Provides high quality images with minimal dot crawl
and cross color noise.
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Slow
For still images
Standard
Normal adjustment
Fast
For moving images
Off (2D}
For Game Mode
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing
a video in monochrome.
On
For viewing in monochrome
Off
Normal color
Q-
29
Advertisement
Table of Contents
