Table of Contents
Advertisement
Useful adjustment
settings
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
Press ENTER while the V-CHIP is working,
and then the secret number setting menu
displays.
Input the 4-digit secret number by using 0-
9. At this time V-CHIP BLOCK temporarily
releases.
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method 1:
Select "Status" setting from the Parental CTRL menu
to reactivate BLOCK. (See page 43.)
Method 2:
Select "V-Chip" setting ("MPAA", "TV Guidelines",
"Can. English Ratings" or "Can. French Ratings")
from the Parental CTRL to reactivate BLOCK. (See
pages 46 and 49.)
Method 3:
Switch off the TV power.
This setting allows you to optimize the settings of
Digital broadcasting.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Digital Setup".
Press A/V
to select "Audio Setup", and then
press ENTER.
Press A/Y
to select "PCM" or "Dolby Digital",
and then press ENTER.
.... ,_iiiiiiiiilHiiiiiiiiii_ii,iii_,,
Performing any of the three above will activate the V-CHIP
BLOCK.
PCM
The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select "PCM".
Dolby Digital
The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.
Press MENU
to exit.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Digital Setup".
Press A/V
to select "Identification", and then
press ENTER.
The current version of the TV software is
displayed.
Q
49
Advertisement
Table of Contents
