» REMOVING OF MAJOR PARTS ................................................................................................................16
» PARTS LIST ...............................................................................................................................................24
» PACKING OF THE SET .............................................................................................................................34
SHARP CORPORATION
1st Edition
SERVICE MANUAL
LCD COLOR TELEVISION
LC-32G2M/X/H
LC-37G2M/X/H
MODELS
OUTLINE
CONTENTS
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-32G2M/X/H LC-37G2M/X/H 1st Edition SERVICE MANUAL SY3M2LC30HV6U LCD COLOR TELEVISION LC-32G2M/X/H LC-32G2M/X/H LC-37G2M/X/H MODELS LC-37G2M/X/H In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
LC-32G2M/X/H LC-37G2M/X/H IMPORTANT SERVICE SAFETY PRECAUTION Ë Service work should be performed only by qualified service technicians who are thor- oughly familiar with all safety checks and the servicing guidelines which follow: » Use an AC voltmeter having with 5000 ohm per volt,...
Page 5
LC-32G2M/X/H LC-37G2M/X/H Precautions for using lead-free solder 1 Employing lead-free solder "PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
( 1), Screwdriver ( 1) • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
LC-32G2M/X/H LC-37G2M/X/H REMOVING OF MAJOR PARTS Ë Ë Ë Ë Ë LC-32G2M/X/H 1. Remove the Terminal Covers 12 . 2. Remove the SP Terminal Rubber Covers 3 and detach the SP Wires. 3. Remove 2 screws for fixing the SP Bracket Cover 4 and detach the SP Bracket Covers.
Page 16
LC-32G2M/X/H LC-37G2M/X/H 8. Remove 7 screws for fixing shield cover q and detach the Shield cover and Wire Holder. 9. Remove 2 screws for fixing the top control cover ass'y w. 10. Remove 2 FPC connecting the LCD panel and LCD controller unit.
Page 17
LC-32G2M/X/H LC-37G2M/X/H 14. Remove the screw for fixing the LCD controller PWB y to detach the LCD controller PWB. 15. Remove 6 screws for fixing the Power Supply PWB u to detach the Power Supply PWB. 16. Remove 2 screws for fixing the R/C LED PWB i to detach the R/C LED PWB.
Page 18
LC-32G2M/X/H LC-37G2M/X/H 24. Remove 5 screws for fixing the LCD Panel Unit h to detach the LCD Panel Unit. 25. Remove 14 screws for fixing the sheet angle (j: 8 pcs., k: 6 pcs.), to detach the sheet angle. 26. Remove the Reflection/Polarization Sheet, Prism Sheet, Diffusion Sheet, and Diffusion Board.
Page 19
LC-32G2M/X/H LC-37G2M/X/H Ë Ë Ë Ë Ë LC-37G2M/X/H 1. Remove the Terminal Covers 12 . 2. Remove the SP Terminal Rubber Covers 3 and detach the SP Wires. 3. Remove 2 screws for fixing the SP Bracket Cover 4 and detach the SP Bracket Covers.
Page 20
LC-32G2M/X/H LC-37G2M/X/H 8. Remove 8 screws for fixing shield cover q and detach the Shield cover and Wire Holder. 9. Remove 2 screws for fixing the top control cover ass'y w. 10. Remove 2 FPC connecting the LCD panel and LCD controller unit.
Page 21
LC-32G2M/X/H LC-37G2M/X/H 14. Remove the screw for fixing the LCD controller PWB y to detach the LCD controller PWB. 15. Remove 6 screws for fixing the Power Supply PWB u to detach the Power Supply PWB. 16. Remove 2 screws for fixing the R/C LED PWB i to detach the R/C LED PWB.
Page 22
LC-32G2M/X/H LC-37G2M/X/H 24. Remove 5 screws for fixing the LCD Panel Unit h to detach the LCD Panel Unit. 25. Remove 14 screws for fixing the sheet angle (j: 8 pcs., k: 6 pcs.), to detach the sheet angle. 26. Remove the Reflection/Polarization Sheet, Prism Sheet, Diffusion Sheet, and Diffusion Board.
USA: Contact your nearest SHARP Parts Distributor to order. 3. NO. DE PIECE 4. DESCRIPTION For location of SHARP Parts Distributor, Please call Toll- in CANADA: Contact SHARP Electronics of Canada Limited Free; 1-800-BE-SHARP Phone (416) 890-2100 MARK: SPARE PARTS-DELIVERY SECTION Ref.
LC-32G2M/X/H LC-37G2M/X/H PACKING OF THE SET (LC-32G2M/X/H) Bar Code Label (TLABKA013WJZZ) Bar Code Label (TLABK0001TAZZ) Joint (SPAKL0023CEZZ) Packing Case (SPAKCB458WJZZ) LC-32G2H (SPAKCB456WJZZ) LC-32G2M (SPAKCB457WJZZ) LC-32G2X Buffer Material (Top) Packing Case (SPAKXB550WJZZ) (for Accessorry) (SPAKFA650WJZZ) AC Cord (QACCBA041WJPZ) LC-32G2H (QACCKA013WJPZ) LC-32G2M...
Page 34
LC-32G2M/X/H LC-37G2M/X/H PACKING OF THE SET (LC-37G2M/X/H) Bar Code Label (TLABKA013WJZZ) Bar Code Label (TLABK0001TAZZ) Joint (SPAKL0023CEZZ) Packing Case (SPAKCB516WJZZ) LC-37G2H (SPAKCB517WJZZ) LC-37G2M (SPAKCB518WJZZ) LC-37G2X Buffer Material (Top) Packing Case (SPAKXA589WJZZ) (for Accessorry) AC Cord (SPAKFA688WJZZ) (QACCBA041WJPZ) LC-37G2H (QACCKA013WJPZ) LC-37G2M...