Table of Contents
Advertisement
Using e×ternal equipment
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
-
VOL ÷
N/
CH /_
INPUT
MENU
POWER
_
o==o
c==o
@
O
O
INPUT
F ASHBACK
@©
VOL
CH
FREEZE
MENU
0
@
¢
Press INPUT.
• A list of selectablesources appears.
INPUT1
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 3, you may need
to change the input signal type setting on the "Input
Select" menu.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Option".
Press A/V
to select
"Input Select",
and then
press ENTER.
[6/
Option
Press A/V
to select the signal type you want
to set, and then press ENTER.
If the selected signal type is incorrect, imagesare
not displayed or displayed without any color.
Press MENU
to exit.
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press INPUT
again to select the input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
A/T.
,, If the corresponding
input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or 3:
COMPONENT VIDEO
{_) VIDEO
• See pages 13 to 16 for external equipment connection.
(_-
32
Advertisement
Table of Contents
