Information Codes - Samsung WF438AAP User Manual

INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Washer.
Unbalanced load prevented your
Washer from spinning.
Door is unlocked when Washer is
running.
Door is open when Washer is running.
Your Washer failed to lock the door.
Water temperature control problem.
(Heater Control problem)
Your Washer has tried to fill but has not
reached the proper water level.
Water level sensor problem
The door will not unlock.
Your washer is not draining.
It can also mean that the unit senses a
small clog while draining.
Your Washer has tried to fill but was
unsuccessful.
Redistribute the load, press the Start/
Pause Button.
Press the Power button to turn off your
Washer, then restart the cycle. If the
code reappears, call for service.
Close the door tightly and restart the
cycle.
If the code reappears, call for service.
Close the door tightly and restart the
cycle.
If the code reappears, call for service.
Call for service.
Call for service.
Call for service.
Make sure the door is firmly closed.
Push the Power button to turn off your
Washer, then turn it on again. If the
code reappears, call for service.
Before calling for service, check the
following.
1) Turn off the unit and turn it on again.
2) Select only the Spin Cycle.
3) Press the Start/Pause to drain the
water.
If it still does not drain, call for service.
Make sure the water faucets are open
all the way. Check for kinked hoses.
Check the inlet screens on the fill
hoses.
Troub eshooting 25
o o
WF448AAW-0_535A-0_ EN.mdd 25 2008-05-06 ;,2kLL_2:23:34