Turning The Tv On And Off; Plug & Play Feature - Samsung series 9 950 User Manual

Operation
Turning the TV On and Off
Press the POWER(b button on the remote control.
You can also use the POWER(b button on the TV.
POWER
IV_) R ...... 0 0
TV MODE ON/OFF
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1=
Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set."
is displayed.
Press the ENTER _ button, then "Select Language of the OSD." menu
is automatically displayed. Press the ENTER C_ button.
2=
Press the A or T button to select language, then press the ENTER
button.
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
3=
Press the _1 or !_ button to select "Store Demo" or "Home Use", then
press the ENTER C _ button. The message "Select the Antenna source to
memorize." is displayed.
>- We recommend setting the TV to "Home Use" mode for the best picture in
your home environment.
>- "Store Demo" mode is only intended for use in retail environments.
>- If the unit is accidentally set to "Store Demo" mode and you want to return
to "Home Use" (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4=
Press the A or T button to memorize the channels of the selected
connection. Press the ENTER _ button to select "Start".
>- Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
>- In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the A, V, 4 or _ button, then press the
ENTER _ button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.