Auto Wali-Mountadjustment (Sold Separately) - Samsung series 9 950 User Manual

Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easil adjusted.
Auto Wall-Mount
TV Rear Panel
EX-LINK Cable
(Not supplied)
Entering the menu
1, Press the A, _r, 41 or _ button on your remote control.
>- The Wall Mount Adjustment screen is displayed.
>- If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the A or T button to select
"Setup", then press the ENTER _ button.
• Press the A or _r button to select "External Settings", then press the ENTER
button.
• Press the A or T button to select "Wall-Mount Adjustment", then press the
ENTER _ button.
Remembering the Position
2. Adjust to the desired position using the A, T, 4, _ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
>- Press the INFO button to reset. Press the 41or D,,button to select "Yes",
then press the ENTER _ button. The position is initialized to the default
setting.
3. Pressthe Blue button.
Press the A and _' buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
>- To not save the current position, press the RETURN button.
>- When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER _ button to save.
>- When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5. Pressthe ENTER _ button.
>- The saved Position appears on the left side of the OSD.
Moving to the remembered position
1,
2=
Complete Step 1 of "Entering the menu".
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
>- You can move the wall mount to one of the 3 pre-set positions by pressing
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
>- If you adjust the position after moving to a pre-set position, the position display will disappear.
>- For installation, refer to the Installation Manual provided with the wall mount.
>- For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
>- This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
>- The auto wall mount will not work when Anynet + or WISELINK Pro is operating.
>- LN46A950D1F models are not compatible with the old electrically powered wall mount model (WMN5090A).