Setting Upanynet - Samsung series 9 950 User Manual

Setting Up Anynet+
The following settings help set the Anynet + functions.
To use the Anynet+ Function, Anynet + (HDMI-CEC) must be set to On
1, Press the MENU button. Press the A or T button to select "Application",
then press the ENTER _ button.
2, Press the ,t, or T button to select "Anynet + (HDMI-CEC)", then press the
ENTER 13_button.
3. Press the A or T button to select "Setup", then press the ENTER _ button.
4. Press the A or v' button to select "Anynet + (HDMI-CEC)", then press the
ENTER [:_ button.
5. Press the A or T button to select "On", then press the ENTER _ button.
>- The "Anynet + (HDMI-CEC)" function is enabled.
>- If you select Off, "Anynet + (HDMI-CEC)" is disabled.
>- When the "Anynet + (HDMI-CEC)" function is disabled, all the Anynet +
related operations are deactivated.
Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
1. Press the A or T button to select "Auto Turn Off", then press the ENTER
button.
2. Press the A or T button to select "Yes", then press the ENTER _ button.
>- The "Auto Turn Off' function is enabled.
>- If you select "No", the "Auto Turn Off" function is canceled.
Press the EXiT button to exit.
>- The active source on the TV remote must be set to TV to use the Anynet +
function.
>- If you set "Auto Turn Off' to "Yes", connected external devices are also turned
off when the TV is turned off. If an external device is still recording, it may or
may not turn off.
Easy Setting
1, Press the TOOLS button on the remote control.
2, Press the ENTER _ button to select "Anynet+ (HDMI-CEC)".
>- The Anynet+ (HDMI-CEC) menus appear on the screen.