Network Connection - Wireless; Network Selection - Samsung series 9 950 User Manual

Series 9 950
Table of Contents

Advertisement

Network Connection - Wireless
You can connect to the Samsung's Infolink network wirelessly through a wireless IP sharer.
The LAN Port on
Wireless
IP sharer
the Wall
TV Side Panel
Wireless
LAN Adapter
for InfoLink
1=
Connect the Samsung
Infolink Wireless adapter
into the Wiselink terminal
of the TV.
>-
You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network.
>-
The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or service
center for purchasing.
>-
To use a wireless network, your TV must be connected to a wireless IP sharer.
>-
If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless
network.
>-
You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.
>-
If the wireless IP sharer allows you to turn on/off the Ping connection function, turn it on.
>-
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
>-
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communications
may fail.
>-
When applying the security key for the AP (wireless IP sharer), only the following is supported.
• 1)Authentication
Mode : WEP, WPAPSK, WPA2PSK
• 2) Encryption Type : WEE TKIP, AES
If you apply a security system other than the systems listed above, it will not work with the TV.
Network selection
Select Cable or Wireless as the method to connect to the Samsung's Infolink
network.
1,
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _
button.
2,
Press the _, or v' button to select "Network selection", then press the
ENTER _
button.
3=
Press the A or T button to select "Cable" or "Wireless", then press the
ENTER _ button.
* Cable: Connect to Samsung's !nfolink network using a cab!el
, Wireless: Connect to Samsung's Infolink network wirelessly.
>- The menu is activated only if the Samsung Wireless LAN Adapter for
InfoLink is connected. (See page 120)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ln46a950d1fLn55a950d1f

Table of Contents