Samsung SCD23 Owner's Instruction Book page 38

I ENGLISH
Basic Recordin l
_, Youcan adjust the LCD during playback.
_, The adjustment method is the same procedureas used in CAMERA mode. (see page 31)
The Speaker works in PLAYER mode only.
• When you use the LCD screen for playback,you can hear the recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the camcorder.
1. Set the power switch to PLAYERmode.
2. Press )411(PLAY/STILL)to play the tape.
3. When you hear sounds once the tape is in play,use the MENU DIAL to adjust the volume.
• A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19 and you will not hear
any sound when the volume is set on 00.
• If you close the LCD while playing,you will not hear sound from the speaker.
• When the cable is connected to the NV jack,you cannot hear sound from the speaker and
cannot adjust the volume.
• Youcan hear sound from speaker by removing the connected cable from the AN jack
<3.2>
0_2_ _7