Samsung SCD23 Owner's Instruction Book page 28

[ ENGLISH ]
Preparation
÷ The amount of continuous recording time available depends on :
- The type and capacity of the battery pack you are using.
- How often the Zoom function is used.
It is recommended that you have several batteries available. (
[
1. Attach the battery packto the camcorder.
2. Connect the AC Power adapter to an AC cord and connect the AC
cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turnthe Camera power switch to off, and the charging indicator will
start to flash, showing that the battery is charging.
all.king time Chargingrate
Once pa_second Less Man 50%
Twice per second 50% ~ 75%
Three_mesper second 75% ~ 90%
Blinkingstops and stays on 90 ~ 100%
On for a second and Error - ResetMe bat[ery packand Me
offfor a second DC cable
®
5. When the battery is fully charged, disconnect the battery pack and the AC Poweradapter from the camcorder.
• Even with the power switched off, the battery pack will still discharge if it is left connected to the camcorder.
]
• The battery pack may be charged a little at the time of purchase.
• To preventreduction in the life and capacity of the battery pack, always remove it from the camcorder after
it is fully charged.