Samsung PN50B850 User Manual page 8

O POWER IN
Connects the supplied power cord.
O EX-LINK
Used for service only.
O USB ! (HDD)/USB 2
Connect a USB mass storage device to view photo files
(JPEG) and play audio files (MP3) or movie files. You can
also use these jacks connect to SAMSUNG's network
wirelessly.
@ The USB 1 (HDD) port is also used as the HDD. HDD
(Hard disk drive) is device which stores digitally encoded
data.
O AUDIO OUT
Audio outputs to external devices,
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
O
HDMI IN I (DV0, 2, 3, 4
Connect to the HDMI jack of a device with an HDMI output.
Use an HDMI cable which is smaller than 14mm.
What is HDMI?
HDMl(High-Definition Multimedia Interface), is an
interface that enables the transmission of digital audio
and video signals using a single cable.
• The difference between HDMI and DVI is that the
HDMI device is smaller in size and has the HDCP
(High Bandwidth Digital Copy Protection) coding
feature installed.
• We recommend that 14mm is proper for cable size.
This is smaller than standard.
PC/DVl AUDIO iN
Connect to the DVI audio output jack of an external device.
O PC IN / PC/DVI AUDIO IN
Connects to the video and audio output jacks on your PC.
If your PC supports an HDMI connection, you can
connect this to the HDMI IN I, 2, 3, or4 terminal.
If your PC supports a DVI connection, you can connect
this to the HDMI IN 2 / DVI AUDIO IN [R-AUDIO-L]
terminal.
COMPONENT IN / AV IN
Connects Component video / audio. The COMPONENT IN
jack is also used as the AV IN jack.
Connect the video cable to the COMPONENT IN
[Y/VIDEO] jack and the audio cable to the COMPONENT
IN [R-AUDIO-L] jacks.
O ANT iN
Uses a 75_ Coaxial connector for an Air/Cable Network.
_) LAN
Connect a LAN cable to this port to connect to the Network.