Listening Through A Receiver; Troubleshooting For Anynet - Samsung PN50B850 User Manual

Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1, Press the TOOLS button. Press the ENTER_ button to select Anynet+ (HDMI-CEC).
2, Press the ,& or _' button to select Receiver. Press the _ or _. button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN jack of the
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the Media Play (USB & DLNA) feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 31)
Troubleshooting for Anynet +
Anynet + does not work. Check if the device is an Anynet+ device. The Anynet +system supports Anynet +devices only.
Connect only one receiver (home theater).
Check if the Anynet÷ device power cord is properly connected.
Check the Anynet +device's Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet + (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn't work in certain situations. (Searching channels, Operating Media Play (USB
& DLNA), Plug & Play, etc.)
• When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
• Check if the Anynet÷ Function of Anynet+ device is set on.
I want to start Anynet +, • Check if the Anynet÷ device is properly connected to the TV and check if the Anynet +
(HDMI-CEC) is set to On in the Anynet +Setup menu.
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
I want to exit Anynet +. • Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet +
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
.......................................................................................................... !S n°L°_°nnet!ed;) .............................................................................................................
The message Connecting to ° You cannot use the remote control when you are configuring Anynet+ or switching to a view
Anynet+ device.., mode.
appears on the screen. ° Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet + device does not ° You cannot use the play function when Plug & Play is in progress.
play,
The connected device is not • Check whether or not the device supports Anynet+ functions.
displayed. • Check whether or not the HDMI 1.3 cable is properly connected.
• Check whether Anynet ÷(HDMI-CEC) is set to On in the Anynet+ setup menu.
• Search Anynet+ devices again.
° You can connect an Anynet÷ device using the HDMI 1.3 cable only. Some HDMI cables may
not support Anynet+ functions.
° If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
The TV programme cannot be • Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output ° Connect the optical cable between TV and the receiver.
,!h:tugh !"t ret !v".r: ...................................................................................................................