Samsung PN50B850 User Manual page 69

Cable Network Setup
Cable Network Setup-Auto Setup
If you connect the LAN cable and it supports DHCP, the Intemet Protocol (IP) Settings are automatically configured.
1. Set Network Type to Cable.
2, Select Cable Network Setup.
3. Set Intemet Protocol Setup to Auto Setup.
The Internet Protocol is set automatically.
4. Select Network Test to check the network connectivity.
Cable Network Setup=Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Intemet Protocol (IP).
Please check if the LAN cable is connected. (See page 65)
1. Set Network Type to Cable.
2. Select Cable Network Setup.
3, Set Internet Protocol Setup to Manual Setup.
4. Set up IPAddress, Subnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
5. Select Network Test to check the network connectivity.
Wireless Network Setup
Wireless Network Setup - Auto Setup
If you want to connect AP, AP should support DHCR
Only devices which support Ad-hoc mode can be connected without DHCP.
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3, Set Intemet Protocol Setup to Auto Setup.
The Internet Protocol is set automatically.
4. Select a network through Select a network.
5. Select Network Test to check the network connectivity.
Wireless Network Setup - Manual Setup
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3, Set Internet Protocol Setup to Manual Setup.
4. Set up IPAddress, 8ubnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
5. Select a network through Select a network.
6. Select Network Test to check the network connectivity.