LG 20LH1DC1 - 20.1IN LCD HOSPITAL GRADE PRO-IDIUM ATSC/NTSC/QAM Operation Manual page 69

CLONING PROCEDURETROUILESHOOTING
® Try a different LT2002 Clone programmer.
® Reset Clone Programmer.
® Retry cloning again.
Master and Other 20LH1 DC1
÷ Cloning is only possible with identical model TVs.
@ Reread 52 - 53 - 54 pages to be sure all tasks were performed,
@ Redo cloning and be sure learning/teaching time is about 1 min, and 5 to15 seconds (75 seconds),
m
z
X
@ Batteries must remain installed to retain time settings.
@ Disconnect newly cloned unit from power for 5 seconds.
• After cloning operations are complete, just unplug the LT2002 from the 20LH1DC1.
• If the 20LH 1DC1 does not display a picture on the TV (blank screen) after a jew seconds, just change channels.
69