Cloning Connections/Teaching Setup - LG 20LH1DC1 - 20.1IN LCD HOSPITAL GRADE PRO-IDIUM ATSC/NTSC/QAM Operation Manual

COMMERCIAL MODE
CLONING CONNECTIONS/TEACHING SETUP
Teaching the Master Setup to Another 20LH1DC1
Connections for the LT2002 to Teach another 20LH1 DC1 the Master Setup
N
0
I'rl
N
J
r"
0
I'rl
I I
I I
I I
I
I
t
\ /
I
I I
I t
Master 20LH1 DC1
Teach Master 20LH1DC1 's Setup to the target
20LH1 DC1
After learning is complete, remove the M.RI. cable from the
master 20LH1 DC1 and connect it to the target 20LH1DC1
that you want to copy the master 20LH1DCI's setup into.
With "THE CLONE HAS CONTROL OF TV" message
displayed, press 2 to go to the "TEACH TO TV" option,
press ON/OFF, POWER, or ENTER.
Select the LT2002 memory that the new setup is in. Press
On/Off to transfer the new setup and other information to
the new 20LH1DC1. Teaching usually takes 2-3 minutes.
After the "TEACHING COMPLETE" message is displayed,
press any button to return to the Clone menu, then press
ON/OFF, POWER, or ENTER. If finished, detach M.RI. cable
from the target, newly cloned 20LH1DC1.
Disconnect 20LH1 DC1 Power for 15 Seconds
Unplug the AC power cord of the newly cloned
20LH1DC1 from the power outlet for about 15 seconds to
activate the newly-copied setup.
/ I
T
MPI;;
: I,
'J:_ '?,' r , .......
QuickSet I! ProgrammeJ
LT2002
Clone Programmer
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
- TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
- TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
This menu should appear after any button is
pressed on the Installer remote.
TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear during Teaching
function.
TEACHING COMPLETE
This display will appear after Teaching is
complete.
$4