LG 20LH1DC1 - 20.1IN LCD HOSPITAL GRADE PRO-IDIUM ATSC/NTSC/QAM Operation Manual page 27

Automatic Time Settings
If you select auto time setting, time will be set from the
digital broadcast information.
Press the MENU button and then use the ADJ • or •
button to highlight the Setup menu and press the O K
(Enter) button.
Use the ADJ or button to the Time.
_ ress the OK (Enter) button to highlight Clock.
Manual or Auto will appear on the menu next to clock.
Select Auto on the sub-menu with the ADJ • or •
button and press the OK (Enter) button.
@
Use the ADJ • • • I_ buttons to set the Daylight
Savings and Time Zone options for your local area.
See the next page.
When finished, press MENU repeatedly to remove the
menus.
-4
rT1
rT1
-4
-4
z
c_
TIME
HOURS
A four-digit figure broken down into hours and minutes, used to enter the current
time when setting the clock or wake-up alarm.
First two digits that are entered when setting the clock or the wake-up alarm.
MINUTES The last two digits that are entered when setting the clock, or the wake-up alarm.
27