Exit Retail Mode; Basic Tv Operation; Changing Channel - JVC BlackCrystal BC50R User Manual

Basic Operations
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
Signal Type:
Start Scan
Move Change OK Select
7
Press OK to start channel scan.
Scanning
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Scan Status:
Analog Channel:
Digital Channel:
Stop Scan
OK
Select
Note:
Scanning may take some time to complete.
Select Stop Scan to cancel the auto scan at anytime.
8
When auto scan is complete, press OK to
continue.
Scan Finish
Channel scan completed.
Analog Channels:
Digital Channels:
OK Select
9
Press OK to complete setup.
Finish
Initial Setup has finished, please press "OK" to
exit Setup Wizard.
OK
Select
Cable
RETURN Previous Setup INFO Exit
0%
0
0
12
26
OK
RETURN Previous Setup INFO Exit
OK
RETURN INFO
Previous Setup Exit

Exit Retail Mode

1
Press RETURN.
2
to select "OK", then press OK to
Press
or
confirm.
Do you wish to exit Retail Mode?
OK

Basic TV Operation

Changing Channel

Press the number buttons to directly select
channels.
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press ENT after pressing
the number buttons.
To Browse Channel
Press the Channel up/down buttons on the
remote control or
CH
increase or decrease the channel.
Press to scroll through the
CH
channels manually.
To Select Analog Channels
1~9 Press 1~9 as needed. Example,
to select channel 2, press 2, then
press ENT.
10~99 Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
100~135: Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
Cancel
, on the TV to
CH
19