Select the Signal Type of your TV input
and start auto scan.
Press OK to start channel scan.
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Scanning may take some time to complete.
Select Stop Scan to cancel the auto scan at anytime.
When auto scan is complete, press OK to
Channel scan completed.
Exit Retail Mode
to select "OK", then press OK to
Do you wish to exit Retail Mode?
Basic TV Operation
Press the number buttons to directly select
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press ENT after pressing
the number buttons.
To Browse Channel
Press the Channel up/down buttons on the
remote control or
increase or decrease the channel.
Press to scroll through the
To Select Analog Channels
Press 1~9 as needed. Example,
to select channel 2, press 2, then
Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
on the TV to