Maintenance And Storage Of Chain Saw; Unpacking - Remington RM1415M Owner's Manual

iMPORTANT SAFETY iNFORMATiON
• Do not let guide bar nose touch anything
when chain is moving (see Figure l).
• Never try cutting through two logs at same
time. Only cut one log at a time.
• Do not buU guide bar nose ortry plunge cut
(boring into wood using guide bar nose).
• Watch for shifting of wood or other forces
that may pinch chain.
• Use extlemecautionwhenreenteringa plevious
cut.
• Use low-kickback chain and guide bar sup-
plied with this chain saw. Only replace these
pal_s with chains and guide bars listed in this
manual.
• Never use dull or loose chain. Keep chain
sharp with proper tension.
Saw Maintenance and Kickback
Safety
F(Now maintenance instructions in this manual.
Proper cleaning of saw and chain and guide bar
maintenance can reduce chancesof kickback. Inspect
and maintain saw after each use. This will increase
the service life of your saw.Note: Even with proper
sharpening, risk of kickback can increase with each
sharpening.
MAINTENANCE AND STORAGE
OF CHAIN SAW
1. Unplug chain saw from power source
• when not in use
• before moving from one place to another
• before servicing
• before changing accessories or attachments,
such as saw chain and guard
2. Inspect chain saw before and after each use.
Check saw closely if guard or other part
has been damaged. Check for any damage
that may affect operator safety or operation
of saw. Check for alignment or binding of
moving parts. Check for broken or damaged
parts. Do not use chain saw if damage affects
safety or operation. Have damage repaired by
authorized service center.
3. Maintain chain saw with care.
• Never expose saw to rain.
• Keep chain sharp, dean, and lubricated for
better and safer performance.
• Follow steps outlined in this manuM to
sharpen chain.
• Keep handles dry, dean, and free of oH and
grease.
• Keep all screws and nuts tight.
• Inspect power cord often. If damaged, have
repaired by authorized service center.
4.
5.
• Never carry chain saw by power cord.
• Never yank power cord to unplug it.
• Keep power cord from heat, oil and sharp
edges.
• Inspect extension cords often and replace if
damaged.
When servicing, use only identical mplace-
ment parts.
When not in use, always store chain saw
• in a high or locked place, out of children's
reach
• in a dry place
UNPACKING
1. Remove all items fiom carton.
2. Check all items for any shipping damage.
If you find any damage or if any parts are
missing, call 1-866-206-2707 (in Canada, call
1-877-696-5533).
Save these instructions.