Reebok RX 7200 User Manual page 23

THE INFORMATION MODEIDEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmifl has
been operated and the total number of miles that the
walking belt has moved. The information mode also aJ=
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa=
tion wifl be shown:
The Time/Segment Time/
Pace display wifl show the
total number of hours the
treadmifl has been used.
TIME
r]
rs
D2w
c:= SEG. rIME == PACE
HOW TO ADJUST THE FIRMNESS OF THE
CUSHIONING SYSTEM
The treadmill features a cushioning system that reduces
the impact as you walk or run on the treadmill. The
firmness of the cushioning system is controlled with
the adjustable isolators on each side of the treadmill.
To increase the firmness, slide the isolators towards
the back of the treadmill. Make sure that both isolators
are in the same position. Note: The faster you run on
the treadmill, or the heavier your weight, the firmer
the cushioning system should be.
The Distance/incline/Laps
display wifl show the total
number of miles (or kilome=
ters) that the walking belt
has moved.
I I'IAX= _°msTAH Ci_ I
AT c:= INCUNE c:= LAPS
An "E" for english miles or an
"M" for metric kilometers will
appear in the Speed display.
Press the Speed/'_ button to
change the unit of measure-
ment.
IA SPEED MPH
L:
PS c:= Km/H
IMPORTANT: The Pulse/
Calories/Fat Calories dis-
play should be blank. If a
"d" appears in the display,
the console is in the "demo"
mode. This mode is intended
IE PULSE c:=iAX. 1
d
c:= CALORUES c:= FAT
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a "d" ap-
pears in the Pulse/Calories/Fat Calories display
when the information mode is selected, press the
Speed '_ button so the display is blank.
To exit the information mode, remove the key from the
console.
ustable Isolator
23