Table of Contents
Advertisement
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 --
appears on the screen. Then press the other
two numbers.
OFF Turns off the VCR when the remote is set to control the
VCR. Turns off other components if remote is programmed.
PAUSE Pauses playback or recording. PressPAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording. Also used for express recording.
REVERSE Rewinds the tape when the VCR is stopped. Searches
backward through
a tape during playback. Starts slow-motion
playback when tape is paused and decreases speed of slow-
motion
playback.
SEARCH
Displays Index, and Go-To Search menus on TV screen
when
VCR is stopped.
Advances
the tape 30 seconds of recorded
material
during
playback.
SPEED Selects a recording speed (SP, o r SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during play, slow motion, or
pause. Reduces picture "jitter"
during stop-action playback.
TVoVCR Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
rr I
TV FUNCTION
BUTTONS
CHAN Up or Down
Selects next higher or lower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. PressGO
BACK to switch between the two channels.
INFO
Shows the TV's status displays on the TV screen.
MUTE
Reduces volume to minimum
level.
I
TV Buttons
1
The TV buttons may not control all
features of all models of RCA,
ProScan, and GE TVs.
23
Advertisement
Table of Contents
